Samsung Refrigerator code AP
Access point mode
Quick answer
On Samsung Refrigerator (2000s onward), AP is a normal display state, not a fault. Not a fault. The cabinet is in its own wireless setup mode so a phone app can join it directly, and it leaves the mode on its own if the setup is not finished. A first thing to check: Setup mode started from the panel or the app and not completed.
- Applies to
- Samsung Refrigerator
- Samsung refrigerator codes · Refrigerator · 2000s onward
- Type of code
- Status or setup value
- Urgency: nothing to fix
- First safe check
- Follow the manual procedure for completing or exiting network setup.
What AP means on this model
Not a fault. The cabinet is in its own wireless setup mode so a phone app can join it directly, and it leaves the mode on its own if the setup is not finished.
Symptoms you will notice
- AP or a network symbol shows on the panel
- The unit cannot be reached from the app
- Nothing responds on the panel while the message shows
- Message appears during a delivery or installation test
Common causes
The code tells you what the control detected, not which part failed. These are the causes we see most often, roughly in order of likelihood:
- Setup mode started from the panel or the app and not completed
- A reset that dropped the unit into setup mode
- Delivery testing before a customer account was added
What you can safely check
These are homeowner-level checks. None of them need you to open a live electrical compartment or work on gas.
- Follow the manual procedure for completing or exiting network setup.
- Check whether the app is waiting for the unit to join.
Do not do these
- ×Do not repeatedly cut the power trying to clear a setup message, because that can leave the unit without a network join.
When to call a technician
Worth scheduling, and worth your own checks first
You can usually keep living with this for a short while, but it will not fix itself. Do the safe checks below first, because a tripped switch or a blocked airflow is a five-minute fix that would otherwise cost you a service call.
- If the appliance has stopped mid-cycle, is making a noise you have not heard before, or smells burnt, stop reading here and call. Those are symptoms of something the fault code does not describe well enough.
A button sequence from the manual, or a repeat of the app setup.
What it costs to fix
Parts
No parts.
Labor
No labour.
DIY or technician
A button sequence from the manual, or a repeat of the app setup.
Typical US part and labor ranges, 2026. They vary by region, model and contractor, so treat them as a planning figure, not a quote.
Scope of this code
- Code table
- Samsung refrigerator codes
- Models in scope
- Samsung Refrigerator, 2015 onward
- Checked
- Confirm on your own unit
- Find the model number on the data plate, then check this code in the service manual for that model. Manufacturers revise code tables between model years, and a revised board can renumber a fault.