Samsung Refrigerator error code 41C
Software update condition
Quick answer
On Samsung Refrigerator (2000s onward), 41C is a fault. It means software update condition. A first thing to check: Software version out of date after a long period in service.
- Applies to
- Samsung Refrigerator
- Samsung refrigerator codes · Refrigerator · 2000s onward
- Type of code
- Fault
- Urgency: Worth keeping an eye on
- First safe check
- Connect the unit to the network and check for a software update through the manufacturer app.
What 41C means on this model
A display model has flagged that its software is out of date or that an update was interrupted. It is a housekeeping message rather than a mechanical fault, and it usually clears once the software is brought up to date through the app.
Symptoms you will notice
- Code appears on a Family Hub or other screen-equipped model
- Message mentions an update or a version number
- The unit otherwise cools and freezes normally
Common causes
The code tells you what the control detected, not which part failed. These are the causes we see most often, roughly in order of likelihood:
- Software version out of date after a long period in service
- An update interrupted by a power cut
- A model shipped with a temporary version for testing or display
What you can safely check
These are homeowner-level checks. None of them need you to open a live electrical compartment or work on gas.
- Connect the unit to the network and check for a software update through the manufacturer app.
- Note whether the fault behaviour changed after the message appeared.
Do not do these
- ×Do not ignore an interrupted update indefinitely. Some versions hold a fault condition in memory until the update is completed.
When to call a technician
No call needed yet, but write it down
Note the date and the exact code, and watch whether it comes back. If it turns into a repeat fault or starts affecting performance, that is when it becomes worth a technician.
- If the appliance has stopped mid-cycle, is making a noise you have not heard before, or smells burnt, stop reading here and call. Those are symptoms of something the fault code does not describe well enough.
Update through the app. If the message will not clear, a service visit is worth it before replacing any hardware.
What it costs to fix
Parts
No parts.
Labor
No labour if the update completes on its own.
DIY or technician
Update through the app. If the message will not clear, a service visit is worth it before replacing any hardware.
Typical US part and labor ranges, 2026. They vary by region, model and contractor, so treat them as a planning figure, not a quote.
Scope of this code
- Code table
- Samsung refrigerator codes
- Models in scope
- Samsung Refrigerator, 2015 onward
- Checked
- Confirm on your own unit
- Find the model number on the data plate, then check this code in the service manual for that model. Manufacturers revise code tables between model years, and a revised board can renumber a fault.